Accesories and options

Type	No.	For	Description
AF 25	H02		Basic box. The auger is driven by a 9 HP Honda petrol engine with centrifugal and Sitex clutch and spur gear. The container is insulated and gas heated, fitted with manually operated LPG gas burners. With a discharge auger and a swing chute in stainless steel as standard. Emptying speed approx. 150 kg/minute. Standard colour is yellow, RAL 1007. Nominal capacity 1, 4 m3. Handles at the rear side of the box is used to operate the auger and hydraulic equipment if installed
AF 25	H04		Basic box. The auger driven by the vehicle hydraulics: 27 L/Min at 120 bar. Including hydraulic motor, Sitex clutch, spur gears and control valve. The container is insulated and gas heated, fitted with manually operated LPG gas burners. With a discharge auger and a swing chute in stainless steel as standard. Emptying speed approx. 150 kg/minute. Standard colour is yellow, RAL 1007.Nominell capacity 1, 4 m3. Handles at the rear side of the box is used to operate the auger and hydraulic equipment if installed
	H06a	AF25	Hydraulic power station. Driven by 11 HP Honda petrol operated engine. Loading max 10 amp. 45 L hydraulic tank. 27 L/Min at 120 bar. Rate of discharge: 150 Kg/Min. When the container is equipped with a hydraulic station it is not possible to use the hydraulic of the vehicle.
	I24	AF25	Thermostatic control of gas heating. Manual ignition. Temperature is adjusted on a knob and shown on a thermometer.
	I26	AF25	Thermostatic control of gas heating. Electronic ignition. Temperature is set and controlled via the built-in Screed Control with digital information of temperature, error-information, etc. Burners are lamella burners
	I06	AF25	Mechanical supporting legs, Galvanised screw-system. Platform height: Min 0.8 m - max 1,5 m. Platform width.: Min 1,7 m - max 2,5 m
	I10	AF25	Mechanical supporting legs For loading / unloading of empty container from vehicles with tipper body.
	C08-25	AF25	Hardox auger. Auger trough in Domex 240 steel.
	I90	AF-25	Plate and fittings for two gas bottles for AF-25
	A02-16		Basic machine powered by the vehicle hydraulics. Hydraulic needs: 27 L/Min at 120 Bar. The Hot Box is insulated and fitted with LPG heating, Thermostatically operated. Stainless steel chute, and safety valve for loading doors is included in the basic machine. 24 Voltage. Emptying speed approx. 150 kg/minute or more (up to 275 kg/minute), depending on the vehicles hydraulic.. Including an outlet chute in stainless steel. Standard colour is yellow, RAL 1007.Handles at the rear side of the box is used to operate the auger and hydraulic equipment if installed
AF50	A02		Nominal capacity 2,8 m³
AF75	A04		Nominal capacity 4,2 m³
AF100	A06		Nominal capacity 5,5 m³
AF100H	A16		As A06, but with increased height of 250 mm. Nominal capacity 7,5 m³
	B02-16 and B02-16		Basic machine with 2- chamber system, designed for storage/transportation of two different materials, with two separate discharge augers equipped as basic machine A.. The 2 chambers have the same size, but can as option be designed with 40% - 60% chamber division. Otherwise like basic machine A
AF50/2K	B02		Nominal capacity 2,8 m³
AF75/2K	B04		Nominal capacity 4,2 m³
AF100/2K	B06		Nominal capacity 5,5 m³
AF100H/2K	B16		As A06, but with increased height of 250 mm. Nominal capacity 8,8 m³
	C1	all	Operation of the auger and hydraulic equipment if installed takes place by buttons activating electrical valves. The operation buttons are placed at the rear side of the Box.
	C45	all	Remote control. 6 lines. Additional price
	C46	all	Remote control. 12 lines. Additional price
	C02	all	Dicky box for manual shovelling is placed at the outlet in stead of the chute
	C04	all	Extended chute. For vehicles with platform height over 1,5 m. Additional price
	C06	all	Mechanical supporting legs For loading / unloading of empty container from vehicles with tipper body.
	C08		Hardox auger and bearing housing in Domex 650 steel for sharp materials.
	C10	all	2,2 m conveyor belt. revolving up to 180 degrees. Chute to be mounted at the conveyor, revolving 360 degrees. Remote electrical control of the auger. Conveyor belt quality: GWF
	C09	all	Funnel for 2 chamber version. Will lower the outlet level by 250 mm.
	C13		Conveyor adapter for 2K-version.Enable changing the conveyor between the two augers. Electrically controlled, hydraulic operated
	C35		Extended auger, 2,2 m. Revolving up to 180 degrees. Chute to be mounted at the auger revolving 360 degrees. Remote control of the box- auger.
	C36		Extended auger, 1,25 m. Revolving up to 180 degrees. Chute to be mounted at the auger revolving 360 degrees. Remote control of the box- auger.
	C37		Additional price for insulation of auger
	C11	all	10 litre bituslip-sprayer
	C12	all	Platform with ladder
	C15	all	Platform, ½ width of box. With separate ladder
	C14	all	Hydraulic opening of loading doors. With safety switch for auger
	C16	all	Additional hydraulic take off With control valve and quick coupling
	C17	all	External Gas Burner
	C20		Electrical heating, Infrared heating in the bottom of the container. 3 phases, 400 V, 14 kW, 32 Amp. input with thermostat. Working together with the gas burners
	C34	all	Multi-lift system hook/wire
	D02	A02-16 and B02-16	13 HP Hydraulic power station. Driven by Honda engine with electric start, LPG- or petrol operated. Loading max 10 amp. 45 L hydraulic tank. 27 L/Min at 120 bar. Rate of discharge: 150 Kg/Min
	D04	A02-16 and B012-16	20 HP Hydraulic power station. Driven by a Hatz diesel engine with electric start. 45 L hydraulic tank. 50 L/Min at 120 bar. Rate of discharge: 275 Kg/min
	D06	A02-16 and B02-16	Hatz Silent, 2 cylinders, up to 35 HP, Rate of discharge: 275 Kg/min. No platform above engine with this engine.
	E02		Hydraulic supporting legs. Powered by the hydraulic system, for loading and unloading from vehicles without tipping body. Also for handling full container
	E20		Rotating yellow beacon (one unit)
	E22		Search light (one unit)
	E24		Fire extinguisher in box
	C30		Inspection panel at auger outlet for easy cleaning. Including safety switch for stop of auger. Additional price per auger.
	C40	AF25	Built-In 100 l Bonding Agent (emulsion) Sprayer tank with 30 mm insulation. The tank is placed in the front of the Hot-Box. The emulsion is heated by a separate burner. Heating of the emulsion takes place by a separate burner. The actual temperature is shown on a thermometer and can be regulated manually. The emulsion is pumped out by using the air pressure from the lorry. When the days works is finished the hoses and the spray gun is cleaned by air. The tank comes with a 5 m long hose and a spray gun as well as a contact to start/stop spring. Including safe for overheating.
	C41	A02-16	Built-In 200 l Bonding Agent (emulsion) Sprayer tank with 30 mm insulation. The tank is placed in the front of the Hot-Box. The emulsion is heated by a separate burner. Heating of the emulsion takes place by a separate burner. The actual temperature is shown on a thermometer and can be regulated manually. The emulsion is pumped out by using the air pressure from the lorry. When the days works is finished the hoses and the spray gun is cleaned by air. The tank comes with a 5 m long hose and a spray gun as well as a contact to start/stop spring. Including safe for overheating.
	C42	all	Separate 10 litres container for cleaning of hoses when finished using the bonding agant
	E32		Compressor, powered by electricity for emulsion tank. necessary if the vehicle has no air supply
	F20	all	Deposit Box (mini paver) 1 x 1 m (only available if purchased with a new hot-box). Arrangement for pulling from truck is individually built at additional costs
	C43	all	Crane for gas bottles. Driven by hydraulic. Maximum weight 100 kg
	I91	all	Extension of auger and frame by 30 cm
	E30	all	Heating around auger outlet. With thermostatic temperature control
	E31		Platform for vibrator plate. The platform is hydraulically lifted up and down